Maintenance Lubricants and Penetrating Fluids
Electron Microscopy Sciences Crystalbond™ 509 Stick, Amber 90 GR
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. For precise high purity work.
Color: Amber
Softening: 160°F (71°C)
Flow point: 250°F (121°C)
Viscosity: 6,000 cps
Electron Microscopy Sciences Thermally Conductive Adhesive ETC Bond 860 25 GR
Thermally conductive adhesive, Aluminum nitride filled, 1:1 epoxy paste, Excellent mechanical & thermal properties to 400 deg F.
Electron Microscopy Sciences Z-6040 Primer 100 ML
This unique primer affords you a better adhesion between your resin and specimen that you are embedding and prevents the sample from pulling away from the resin during sectioning.
Research Products International Corp Vacuum Pump Oil, 1 Gallon
For use with High Capacity Vacuum Pump.
Electron Microscopy Sciences Loctite 409™ Super Bonder Tube 3 GR
General-purpose gel adhesive, clear, gap fills 0.010"; surface insensitive Ethyl, tensile shear strength 3,200 psi, and temperature range -65 deg F to 180 deg F. Cure speed: fixture - 75 seconds, full - 24 hours.
Ace Glass, Inc. Dow Corning, High vacuum grease, tube, 5.3 oz. (150g)
Dow Corning High Vacuum Grease. A silicone lubricant that effectively seals and lubricates glass stopcocks, joints and glass-rubber connections. Resistant to most chemicals, heat stable and inert. Supplied in tube, 5.3 oz. (150g).
Electron Microscopy Sciences Edwards Ultragrade 19 4 LT
Edwards Ultragrade 19 Oil is specially recommended for use in clean pumping applications. The oil offers reduced maintenance cost, longer fluid life, and a cooler running pump.
Electron Microscopy Sciences Santovac 5 for Ultra High Vacuum Range 500 ML
A Polymethyl Ether, designed for an ultra high vacuum range: 10-10 torr. Ultra low vapor pressure results in low ultimate pressures; there is no need for a cold trap and it is suitable for diffusion pumps. Santovac 5 may discolor with use but it will maintain its physical properties.
Electron Microscopy Sciences Microtome Oil 50 ML
A chemically pure, high-grade lubricant used in precision instruments. Should be used periodically to lubricate cross-rollerbearings for microtomes.
World Precision Instrument Sylgard Silicone Elastomer
2-part silicone elastomer, ideal for potting and encapsulating applications
This silicone elastomer has a very low dielectric constant sealing compound, which makes it ideal for patch clamping and many other lab applications, especially in electrophysiology applications.
Electron Microscopy Sciences M-Bond 43B Kit
The M-Bond adhesives are high-performance epoxy resins, which are formulated especially for bonding strain gages and special-purpose sensors. When properly cured, these adhesives are useful in temperatures ranging from -452F to +350 F (-269C to+ 175C) with M-Bond 43-B, and to +700F (+370C) for short periods with M-bond 600 and 610. In common with other organic materials, oxidation and sublimation effects at elevated temperatures limit life. Shelf Life: 9 months.
Curing time: 2 hours at +375F (+190C)
Package: 4 x 25 ml
Electron Microscopy Sciences M-Bond System, M-Bond 600, 1 kit
The M-Bond adhesives are high-performance epoxy resins, which are formulated especially for bonding strain gages and special-purpose sensors. When properly cured, these adhesives are useful in temperatures ranging from -452F to +350 F (-269C to+ 175C) with M-Bond 43-B, and to +700F (+370C) for short periods with M-bond 600 and 610. In common with other organic materials, oxidation and sublimation effects at elevated temperatures limit life. Shelf Life: 3 months.
Curing time: 3.5 hours at +350F (170C)
Package: 4 x 10 ml A and 4 x 15 ml B
Ted Pella Inc Silver Conductive Epoxy
Strong, highly conductive epoxy for solderless connections and repairs of circuit boards, static discharge shielding, grounding and conductive paths. Properties: Bonding surface mount components, High strength conductive bonds, Quick, low or no heat cure – air dries, Rework or remove with hot soldering iron, Excellent electrical conductivity, and 2-part epoxy, reusable applicator with stir stick, 7g each.
